#How to get raspberry pi emulator on mac how to#
#How to get raspberry pi emulator on mac install#
#How to get raspberry pi emulator on mac serial#

#How to get raspberry pi emulator on mac serial#

Next, we need to figure get the Pi to use the serial port as a console.

#How to get raspberry pi emulator on mac install#

To install the SLiRP software which is key to this process, type the command: sudo apt-get install slirp WeвЂ™re essentially setting up the Pi so it will listen on the serial (usb) port for the Mac, allow it to log in, and serve PPP. Again, open a terminal and type вЂњssh or ssh few things need to be set up on the Pi. On the Mac I used the modem port, but you can use the printer port if youвЂ™d like. Using your serial cable(s), attach the Mac to the Pi. On the MacBook I used to set this up, you would open the terminal application and type: ssh Plugging In Test that you are able to SSH over to the Pi. In my setup, the PiвЂ™s hostname is вЂњraspiвЂќ and the user is вЂњpiвЂќ.

Interfacing OptionsвЂќ I would also advise setting a new password while youвЂ™re in there. Once youвЂ™re in the config menu youвЂ™ll want to enable SSH so youвЂ™ll be able to remote into the Pi during the process to make tweaks.

Run the command raspi-config as root: sudo raspi-config Then, attach the Pi to a monitor/keyboard/mouse and make sure the Pi can see the internet. I used Apple Pi Baker to install Raspian onto my SD card. Other goodies IвЂ™ve used on the Mac in this process: MacWeb 2.0, Fetch 3.0.3, NCSA Telnet 2.6, PopMail II 2.2ДЇirst, set up the Raspberry Pi.Mac TCP 2.0.4 вЂ“ this should have been installed with 7.5.Mac PPP version 2.1.1SD (includes an extension and control panel, System 6 I had better luck with PPP 2.0.1).System 7.5 (I chose this version in order to run MacWeb, but IвЂ™ve also got this working under 6.0.8).telnetd (not required, more about this later!).Raspian, which I used Apple Pi baker (via a MacBook Pro) to install to my SD card.Besides, the two cables were about $5 each. There are wiring schematics to do this, but with everything else that has to come in place, I figured why risk messing that up. These are also fairly common and cheap to come by.ДЄs a side note, some people have successfully made their own serial cable by cutting into a Mac serial cable (a printer, AppleTalk, cable etc) and splicing it with a USB cable. This adapts the cable coming from the Mac to the USB port on the Pi.

A DB-9 RS-232 to USB 2.0 serial cable.

This connects to the Mac modem/printer serial port.

A DB9 Female to Mini Din-8 Male serial cable.

A newer computer to create write the Raspian image to the SD card.

Since the older Pi didnвЂ™t have internal WiFi, I used a small TP Link usb Wifi adapter. My Pi was an older вЂњModel BвЂќ running Raspian. In my case, it was an SE FDHD with 4mb of ram. In the end, I needed the following hardware: The Mac connects with PPP over the serial cable and the Pi has a PPP sever running called SLiRP. The other nice thing about using the Pi was it essentially gives me wireless internet on the old Mac, so I donвЂ™t have to be tethered to an Ethernet jack.ДЄt risk of over-simplifying things, the Raspberry Pi shares itвЂ™s internet connection over a serial cable. Without spending $100s of dollars on vintage networking cards I did happen to have a Raspberry Pi kicking around.

Use a Raspberry Pi вЂ¦ and thatвЂ™s the method I used and will describe below.

вЂњShareвЂќ the internet connection from a newer Mac via LocalTalk and bridge software.

#How to get raspberry pi emulator on mac how to#

In trying to research how to get my SE online I came across a few different ways people have gotten their 68k Macs online, hereвЂ™s a summary of some: Introducing a computer from the 80вЂ™s to todayвЂ™s internet